Sod Care

If you want to give the new sod a chance, you are going to have to make sure your sod and soil is not dry too long this week. Living in the GTA, we recommend at least two times a day; once in the morning and once early evening. If it is hotter or the area has high drainage (like on a hill), you may have to do more.



When watering, you will need to be sure the area is getting completely soaked. Poke a spike or screwdriver into the new soil to ensure that you are watering enough. The water needs to reach the soil underneath the sod. If the water is not penetrating down enough, you will start to see large gaps between the rolls of sod; this means your sod is starting to shrink. The first sign of shrinkage is the edges of the rolls will start to turn yellow.



Watering sod can be a little tricky since it is possible to overwater. Dmitry at Blue Onion Landscaping says to give the sod a good soak rather than a constant light sprinkler shower. This way, you ensure that the water is actually penetrating into the topsoil. As the sod dries out from the summer heat, the topsoil will maintain its moisture. The sod's rooting system will seek out the moisture, germinating deeper into the soil to get the water. If the sod is getting too much water, it will actually prevent the roots from developing into the soil. We call this spoiling as the sod has no drive to create a deep root system since it is getting everything it needs where it is! You are also going to want to minimize foot traffic while the new root system is establishing.

The root system should be starting to establish itself now. Gently pull back a corner of the sod in several places to check. The lawn could be difficult to pull up so do not force it. You can cut your watering back to once a day in the morning. Again, it is important to make sure the water is hitting the soil underneath the rolls of sod.



If your lawn comes up fairly easy, it could mean a few different things. If it is still a nice luscious green, it could mean it is being overwatered and is being spoilt. If parts are yellowing, it could mean you are under-watering or the sod has been laid in a very shaded area and will need special attention.

Assuming your sod is well rooted, you will be able to reduce your watering to every other day. At this point, it is also safe to mow the lawn. Before mowing, take a walk along your lawn to pull up any weeds. Set your blade to the highest-setting available. Do not cut more than one third of the grass when mowing; for example, if your grass is 4", do not cut lower than 2.8". During this period, you will want to keep your lawn at around 2 ½"-3". Make sure to remove all yard clippings; do not leave any clumps on your lawn. This will block out the sun and create thatch, making it harder for new sod to grow.

Your lawn should be fairly established at this point, so it will be able to handle normal wear and tear. You can water your lawn 2-3 times a week, depending on the weather. You will still want to make sure you are applying enough water.



If you notice areas that are patchy, you may want to topdress, fertilize and seed. Be sure to only add ⅛"– ¼" per topdressing application or you may block out too much of the sun and smother your grass.

The first winter might be especially hard on your lawn. It is common to see some yellowing and burn. If you kept up with your watering when it was first installed, your lawn will bounce back in no time! At this point you will want to walk along your lawn pulling up any weeds you see. If your lawn is particularly yellow with a lot of dead grass, you may also need to dethatch, aerate, topdress, seed and fertilize.



The first few winters is hard on new sod and it may not thrive if you neglect it. Be sure to keep up with your yearly maintenance to keep it healthy! Read the full yearly maintenance plan here.



It is very important to monitor your lawn for the first few weeks to make sure it is getting the proper care.